Kommentar: Einfügen von HTML im Kommentar: Link einfügen: <a href="LINKURL" target="_blank">LINKTITEL</a> Bild einfügen: <img src="BILDURL"> Text formatieren: <b>fetter Text</b> <i>kursiver Text</i> <u>unterstrichener Text</u> Kombinationen sind auch möglich z.B.: <b><i>fetter & kursiver Text</i></b> C Quellcode formatieren: <code>Quellcode</code> BASIC Quellcode formatieren: <basic>Quellcode</basic> (Innerhalb eines Quellcodeabschnitts ist kein html möglich.) Wichtig: Bitte mache Zeilenumbrüche, bevor Du am rechten Rand des Eingabefeldes ankommst ! -> I > > > > Hello Pepe, > > > > > > > > the V 1.0 Programmer (see CD Lable) works only with 32-bit Systems (Vista & Win7). > > > > The new version V 2.0 works mith 64-bit. > > > > The old programmer V 1.0, you need to reprogram the factory settings. > > > > Then you can use the original driver. > > > > > > > > http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx > > > > > > > > See AN144 and use the CP210xSetIDs.exe to reprogram. > > > > > > > > VID, PID and divece string see attachemend.. > > > > > > > > Best regards, > > > > > > > > Ulli > > > > > > > > > > Hi Ulli, > > > > > > OK, this sounds a lot more convenient than my procedure. But before I try it I have this question: > > > If I reprogram my V.1 programmer cable, will I still be able to use it with my other computer which > > > runs on XP (32 bit)? And if so, wil I have to reinstall the driver there? > > > > > > Regards, > > > Pepe > > > > Youneed the new Silabs driver, works Xp up! > > > > Ulli > > > Hi Ulli, > > I'm still not sure. Remember, I'm just an amateur, not an professional programmer! > > AN144 says: > To use CP210xSetIDs.exe, it is necessary to have the devices connected and have the unmodified > device drivers that shipped with the original CP210x kit installed. The customized device driver > installation files that contain the VID and PID values should also be installed. > > Now we are not talking about a CP210x kit but about a Voltcraft programmer cable. Does the above > mean that I should do the following in Windows 7 64 bit: > 1. Remove all installed VCP drivers. > 2. Install the V.1 Voltcraft driver that came on the CD with the cable. > 3. Plug in the cable. > 4. Run CP210xSetIDs.exe and reprogram. > Is this correct and sufficient? > > Then for my other computer which runs XP you write: You need the new Silabs driver, works XP up! > Does that mean that I should do the following: > 1. Remove the V.1 Voltcraft driver that came on the CD with the cable (and which is working right now!) > 2. Install the latest Silabs driver (changing VID and PID in the inf file using the step by step procedure > of my first posting). > If this is true, I should better leave everything on both computers as it is, since it is working now. > > Regards, > Pepe > > >
